Choosing the Province Where You Should Qualify as a P. Eng.

There are subtle differences in the requirements and process to qualifying as a Professional Engineer (P. Eng.) in Canada depending on the provincial regulator you qualify with. This article is intended to summarize some of these differences, especially with respect to technical exams.

Why You Need to Know About Inter-Provincial Mobility

The provincial regulator that may be best for your path to a P. Eng. may not be in the same province where you live and work.

Thankfully, in 2015, The Canadian Free Trade Agreement (a treaty between provinces) made it possible for a P. Eng. to more or less automatically be approved for registration in another province in as little as two weeks.

This gives the applicant the freedom to complete the technical exams and qualify in any province and then transfer into the province they live and work after qualifying as a P. Eng. The technical exams are even proctored online so where you live when you write them is not important.

When you transfer through interprovincial mobility, your academics and experience are not re-examined. So, if you live in Nova Scotia but don’t have 12 months of Canadian experience, then you can apply to EGBC and then transfer to Engineers Nova Scotia without the need for 12 months experience.

Many registration snags can be cleared simply by understanding the rules and writing your technical examinations.

How the Provincial Regulator Requirements Compare

The table below summarizes how the provincial regulators compare. The summary includes links to the various provincial acts, regulations, bylaws and other information. It is important to fully understand the provincial regulator requirements before you apply. Some regulators are more transparent on what the actual requirements are than others so going to the legal framework in the province is valuable.

Regulator	Acceptance Criteria	Notes
EGBC (BC)	P.L. Eng. bridging program: – 10 years xp, 4 years as PL Eng. Others: 4 years XP plus – (I) a university-level bachelor’s degree in applied science or engineering…[plus technical exams] (II) 4 years of full-time post-secondary education in applied science, engineering, geoscience, science, or technology…[plus technical exams]	P.L. Eng. bridging program: – FE plus PE or other technical exams -thesis / technical interview Others: – no Canadian XP required – popular w/ B.Tech. graduates – technical exams and/or an interview – generally will not let you write if > 9 technical exams. – if you do not have 4+ years xp at time of application, you will have to complete 3 or more years xp after your exams (ouch!!!)
Engineers Yukon	An applicant for registration as a professional member shall meet the following qualifications before being approved for registration: (a) (i) a confirmed degree in Engineering from a university program which is accredited by the Canadian Engineering Accreditation Board and is recognized by the Board of Examiners, or (ii) is a graduate of a program which the Board of Examiners judges to be equivalent, and (iii) has at least four years experience in Engineering acceptable to the Board of Examiners	Applications are processed by APEGA.
APEGA (Alberta)	“Student” Applicant (ii) has at least 2 years of post-secondary education…in areas that relate to the science or technology of engineering… together with (A) one year of experience in work of an engineering or geoscientific nature acceptable to the Board of Examiners where the post-secondary education consists of an engineering…technology program…, or (B) 3 years of such work experience, where the post-secondary education consists of education other than such a program “Examination Candidate” Applicant (b) the applicant is a graduate of (i) a university program in engineering… (ii) a related academic program… but the Board of Examiners has required the applicant to complete one or more confirmatory examinations or examinations for the purpose of correcting a perceived academic deficiency.	No Canadian XP required. “Students” get as many as 24 exams for two-year diploma applicants and 19 exams for three-year diploma or degree applicants. “Students” require eight years XP one of which must be after exams are complete to register as a P. Eng. “Examination Candidates” need four years XP Both categories may write the FE exam for credit of up to five technical exams.
NAPEG (NWT & Nunavut)	3) An applicant for registration as a member or licensee who is a graduate of a university program in engineering or geoscience that has not been approved by the Board of Examiners must, as a condition for registration, (a) pass examinations set by the Board; and (b) have at least four years experience satisfactory to the Board in the practice (4) An applicant for registration as a member or licensee who has not graduated from a university program in engineering or geoscience must, as a condition for registration, (a) pass examinations set by the Board of Examiners; and (b) have at least six years experience satisfactory to the Board of Examiners in the practice of engineering or geoscience	Applications are processed by APEGA.
APEGS (Saskatchewan)	(i) in the case of a person who applies for registration as a professional engineer, a bachelor level university program of study in engineering recognized by the council	non-CEAB programs may have three “confirmatory” technical exams or additional “deficiency” technical exams. Technical exams must be completed in 4 years. The FE exam can be used for credit against some technical exams.
APEGM (Manitoba)	A three or four year degree related to engineering or the equivalent	– no minimum XP requirement – no Canadian XP requirement – no technical examinations Three options for confirmatory program – – Masters in engineering from any Canadian university – FE exam – special uManitoba program – “related to engineering” includes sciences like physics, geoscience, mathematics, etc.
PEO (Ontario)	Applicants prior to May 15th, 2023: – A three-year diploma in technology from a college of applied arts and technology; or – A bachelor’s degree in a relevant science area; or – Academic qualifications deemed by the Council to be equivalent to a diploma or degree Applicants after May 15th, 2023: A bachelor’s degree in an engineering program that is either accredited by the Canadian Engineering Accreditation Board (CEAB), or a bachelor’s degree in an engineering program that is included in the International Institutions and Degrees Database (IIDD) administered by Engineers Canada and the successful completion of a confirmatory examination program.	– 48 months XP required – no Canadian XP required – confirmatory program of 4 technical examinations for IIDD list applicants. On May 15, 2023 PEO started to disallow all non-CEAB accredited programs if they are Canadian in origin. PEO has admitted that their current standard has significant DEI issues and it may indeed be a violation of Section 15 of the Charter of Rights and Freedoms. It seems likely that PEO will take corrective action and allow at least B.Tech. graduates access to technical examinations.
OIQ (Quebec)		– OIQ has a separate technical examination program where exams are written in-person in French -OIQ has a French language exam but you can defer this exam for three years if you come in through interprovincial mobility
APEGNB (New Brunswick)	The academic requirements for entrance in the Register as a [P. Eng.] shall be satisfied by graduation from an accredited engineering program… In the case of an applicant who has not graduated from a [CEAB accredited program] the Board may take steps through examination, assessment, confirmation, or other testing to confirm academic requirements are satisfied. The experience requirements…four years of relevant experience acceptable to the Board	– no Canadian XP required – must be a resident of NB
Engineers Nova Scotia	(a) has obtained a degree in engineering from a school, college or university, which degree is approved by the Council, and has had four years experience in engineering; (b) has obtained a degree in science, other than engineering, from a school, college or university, which degree is approved by the Council, and has had four years experience in engineering; (c) [other regulatory body – see bylaw text] (d) has passed the examinations prescribed by the Council and has had sufficient number of years of experience in engineering to qualify such person in the opinion of the Council to practise professional engineering; or (e) has had in the opinion of the Council outstanding experience in engineering.	– 12 months of Canadian XP required. FE exam can be written instead of some technical exams.
Engineers PEI	The academic requirements for registration may be satisfied by graduation from an accredited engineering program or by satisfactory completion of a program of examinations… Registration applicants who are graduates of an accredited engineering program shall have completed at least four years of engineering experience… Any other applicants shall have completed at least five years of engineering experience…	– 12 months of Canadian XP required You must complete your technical exams by a date assigned to you. You may have the option to write the FE exam or have it assigned to you.
PEGNL (Newfoundland & Labrador)	(a) a degree in engineering or geoscience from a university program approved by the registration committee and at least 4 years of applicable work experience… (b) academic qualifications equivalent to a degree in engineering or geoscience demonstrated by successful completion of the confirmatory examinations that may be required by the registration committee and at least 4 years of applicable work experience…subsequent to the attainment of those academic qualifications; or (c) successfully completed the examinations that may be prescribed by the registration committee and have a total of at least 6 years of applicable work experience…one year of which shall be obtained subsequent to successful completion of the prescribed examinations.	– no minimum XP requirement – no Canadian XP requirement If you are assigned technical exams, you enroll as an “Examination Candidate”. Technical exams for non-CEAB applicants.